High pressure
High volume

Magnetic Drive Centrifugal Pumps

To 14,000 GPH
To 110 foot head
Seven model sizes available

  • no seals - can't leak
  • all plastic - no metal contact
  • good for wide range of acids and alkalis

Here's a break-through in magnetic pumps - real high pressure, high volume units which will deliver up to 14,000 GPH with pressure to 48 PSI. The revolutionary design utilizes "orbital" magnets, separated only by the pump housing. And, the magnetic torque actually exceeds the motor torque.

Seal-less, leak-proof, all-plastic Magnetic drive pump.

Only one moving part… no metal in contact with solution - the SUMMIT MAGNETIC PUMP is a compact, self-contained unit that affords, for the first time in magnetic pumps, high volume and high pressure in continuous operation. The only moving part in the solution ins the magnetic impeller. This is completely encapsulated in plastic, molded at the same time as the impeller itself is molded. The one-piece internal shaft and thrust washer are a special analysis, silica-free ceramic, impervious to a wide range of acids and alkaline solutions - including fluorides, oxidizing and chromic acids.

Recommended for use with most acids and alkaline solutions including: all precious metal electrolytes; high chlorides; fluoborates; chromic acids; nitric acids; hydrofluoric acids. Consult factory for special requirements.

Specifications:

Model MT3

  • Materials in contact with solution: Ryton, ceramic, Viton - to 190F. Inlet and outlet are ½" MPT. Dimensions: 8" L x 5" W x 5" H. Weight: 5 lbs. Motor - Continous duty, ventilated, 1/20 H.P., 115v/1ph/50/60 Hz.

Model TE-MT3

  • Same as Model MT3, except motor is TE, 1/15 H.P. 115/230V, 50/60 Hz. Dimensions: 12" L x 5" W x 7" H. Weight: 12 lbs.

Model MC4

  • Materials in contact with solution: Polypropylene, Ryton, Ceramic, Viton - to 190F. Inlet is 1" FPT, Outlet is ½" MPT, Dim. 12" L x 6" W x 7" H. Weight: 17 lbs. Motor - ¼ H.P., TEFC, 115/230v/ 1 ph/50/60 Hz.

Model MC4.6

  • Materials in contact with solution: Ryton, Ceramic, Viton, Teflon - to 190F. Inlet is 1" FPT, Outlet is ¾" MPT. Dim. 14" L x 8" W x 8" H. Weight: 30 lbs. Motor - ½ H.P., TEFC, 115/230/1ph, or 230/460/3 ph, 50/60 Hz.

Model MC4.6K

  • Same as above, except Kynar instead of Ryton

Model MC5

  • Materials in contact with solution: Polypropylene, Ryton, Ceramic, Viton, Carbon - to 190F. Inlet 1 ½" FPT, Outlet is 1" MPT. Dim. 18" L x 9" W x 9" H. Weight: 45 lbs. Motor - ¾ H.P., TEFC, 115/230/1 or 230/460/3, 50/60 Hz.

Model MC5K

  • Same as above, except Kynar instead of Polypropylene and Ryton.

Model MC8

  • Materials in contact with solution: Polypropylene, Ryton, Ceramic, Viton, Teflon - to 190F. Inlet is 2" MPT, outlet is 1 ½" MPT. Dim: 26" L x 13" W x 10" H. Weight: 135 lbs. Motor - 5 H.P., TEFC, 230/460/3/60.

Model MC8K

  • Same as above, except Kynar instead of Polypropylene and Ryton.

Options:

  1. Cord, plug and switch. (115 volt only)
  2. Pump and motor mounted on a base
  3. CPVC Hose Terminals

< Back to products

ContactHomepage Top of page

About | Products | Applications | Request Info | Contact Us